Only available OTA upgrade from V1.0.1/V1.0.2 to V1.0.4.
V1.0.3 is not available to upgrade to v1.0.4. Please use USB upgrade only.
Online upgrade steps:
1, Please confirm your X1000 4K is connected internet by LAN/WiFi.
2, Please do not power-off your X1000 4K during upgrading.
3, Choose Setup / others / upgrade / New version, choose OK to download the firmware V.1.0.4, it will take around 10-30 minutes to download full package of V1.0.4.
4, After 100% download, choose OK for upgrade firmware, it will takes 2-5 minutes to online firmware upgrading.
USB upgrade from V1.0.3 to V1.0.4:: download link
Please follow the steps below:
1, Copy the intall.img to the root of a USB key / stick, insert the USB key / stick to X1000 4K's USB3.0 host port.
2, Press power button on X1000 4K and connect the power supply to X1000 4K, hold on the power button for about 5 seconds until you see the led of your USB Key flashing and the progressing icon on the TV screen which means the upgrade just started. Normally it takes 2 to 3 minutes to complete the upgrade.
Change list from V1.0.2 to V.10.4:
1.Fix: No sound during playing RMVB with RealAudio.
2.Fix: Movie aspect ratio not displaying correctly. (Set Fit as default.)
3.Fix: Playback error of BDMV folder in SAMBA Server.(Some BDMV folder can't be played in V1.0.2)
4.Fix: Green screen/stumble issue of media playback after exit HDMI IN.
5.Fix: No sound during playing mp3/wma/flac/ape/ogg when passthrough enabled.
6. Enable 1080p 24Hz
7. Detect frame rate of movie automatically.
The output mode will be set to 1080p 50Hz when play a 1080p file with 25fps or 50fps.
The output mode will be set to 1080p 60Hz when play a 1080p file with 30fps or 60fps.
The output mode will be set to 1080p 24Hz when play a 1080p file with 23.976fps.
8. Improve subtitle support. Support France, German,Czech,Spanish,Finnish,Romanian,Greek,Vietnam,GBK,BIG-5...
But Hebrew/Arabic/Thailand subtitle still not supported now.we will fixed it in future firmware.
9. Update movie center to improve the accuracy of movie poster.
10.Update Kodi.
Support hardware decoding of BD ISO/BDMV folder in local disk.Use RTK-Player automatically during local movie playback.
This Kodi still can't support hardware decoding of BD ISO/BDMV Folder in SAMBA Server.
Go to Kodi->Programs->Programs Add-ons->Region Add-ons Installer,you can install common Add-ons of different region.
Thanks and best regards
MeLE Service Team
V1.0.3 is not available to upgrade to v1.0.4. Please use USB upgrade only.
Online upgrade steps:
1, Please confirm your X1000 4K is connected internet by LAN/WiFi.
2, Please do not power-off your X1000 4K during upgrading.
3, Choose Setup / others / upgrade / New version, choose OK to download the firmware V.1.0.4, it will take around 10-30 minutes to download full package of V1.0.4.
4, After 100% download, choose OK for upgrade firmware, it will takes 2-5 minutes to online firmware upgrading.
USB upgrade from V1.0.3 to V1.0.4:: download link
Please follow the steps below:
1, Copy the intall.img to the root of a USB key / stick, insert the USB key / stick to X1000 4K's USB3.0 host port.
2, Press power button on X1000 4K and connect the power supply to X1000 4K, hold on the power button for about 5 seconds until you see the led of your USB Key flashing and the progressing icon on the TV screen which means the upgrade just started. Normally it takes 2 to 3 minutes to complete the upgrade.
Change list from V1.0.2 to V.10.4:
1.Fix: No sound during playing RMVB with RealAudio.
2.Fix: Movie aspect ratio not displaying correctly. (Set Fit as default.)
3.Fix: Playback error of BDMV folder in SAMBA Server.(Some BDMV folder can't be played in V1.0.2)
4.Fix: Green screen/stumble issue of media playback after exit HDMI IN.
5.Fix: No sound during playing mp3/wma/flac/ape/ogg when passthrough enabled.
6. Enable 1080p 24Hz
7. Detect frame rate of movie automatically.
The output mode will be set to 1080p 50Hz when play a 1080p file with 25fps or 50fps.
The output mode will be set to 1080p 60Hz when play a 1080p file with 30fps or 60fps.
The output mode will be set to 1080p 24Hz when play a 1080p file with 23.976fps.
8. Improve subtitle support. Support France, German,Czech,Spanish,Finnish,Romanian,Greek,Vietnam,GBK,BIG-5...
But Hebrew/Arabic/Thailand subtitle still not supported now.we will fixed it in future firmware.
9. Update movie center to improve the accuracy of movie poster.
10.Update Kodi.
Support hardware decoding of BD ISO/BDMV folder in local disk.Use RTK-Player automatically during local movie playback.
This Kodi still can't support hardware decoding of BD ISO/BDMV Folder in SAMBA Server.
Go to Kodi->Programs->Programs Add-ons->Region Add-ons Installer,you can install common Add-ons of different region.
Thanks and best regards
MeLE Service Team